Concept redesign by Bronxo Technologies for Tempest. Official site: tempest-eng.com
Tempest EngineeringLow temperature chillers and TCUs · Cleveland, OH Sales engineering(216) 883-6500

Engineer-to-order · Cleveland, Ohio · since 1983

Industrial chillers built for -60°F and colder

Tempest designs, builds and tests low and ultra-low temperature chillers and temperature control units in a 70,000 sq ft plant in Cleveland, then services them 24/7.

Ammonia (R717) · Class 1 Div 2, Groups B, C and D · UL 508 panel shop · factory acceptance testing

Tempest E3:ICE chiller skid with control panel on the Cleveland plant floor
LOW SIDE · R-508BHIGH SIDE · R-507A C1COMP C2 CASCADE HX EVAPORATOR -73°FSATURATED SUCTION AIR-COOLED CONDENSER

A Tempest 55-ton cascade chiller for jet engine testing

Chiller down? 24/7/365 emergency service for industrial refrigeration, including ammonia and cascade systems, on Tempest and other makes.

Call (216) 883-6622

Recent builds, with the numbers

A few of the custom low temperature chillers on our portfolio. See the full portfolio.

  • -73°F SST · 55 tons

    55-ton air-cooled jet engine testing cascade chiller

    Refrigerant
    R-507A | R-508B (cascade)
    Fluid
    Dynalene MV
    Compressors
    Low side (1), high side (2) semi-hermetic screw
    Evaporator
    Brazed plate DX
    Controls
    Allen Bradley CompactLogix PLC
  • -32°F SST · 250 tons

    250-ton water-cooled industrial ammonia chiller

    Refrigerant
    R-717 (ammonia)
    Fluid
    50% methanol/water
    Compressors
    Two open drive screw
    Classification
    Class 1, Div 2, Group D
    Evaporator
    Flooded carbon steel shell and tube
    Controls
    Vilter Vision 20/20
  • -50°F SST · 125 tons

    125-ton water-cooled pharmaceutical chiller

    Refrigerant
    R-507
    Fluid
    Syltherm XLT
    Compressors
    Three economized two-stage screw, 50% turndown each
    Skid
    18' L x 9' W x 8' H
    Tank
    800 gallon cold Syltherm XLT skid
  • 15°F SST · 205 tons

    205-ton ammonia ice rink chiller, two sheets (one Olympic, one NHL)

    Condensing
    Evaporative-cooled
    Refrigerant
    R-717
    Fluid
    40% ethylene glycol
    Compressors
    (3) open drive 6-cylinder recip
    Dispersion tank
    3,600 gallon stainless
    Controls
    Allen Bradley CompactLogix PLC
  • -52°F cooling · 230°F heating

    7.2-ton air-cooled chiller and 48 kW TCU in one container

    Refrigerant
    R-507
    Fluid
    Dynalene HC-50
    Compressor
    2-stage screw, air-cooled condenser
    Heat
    48 kW low watt density electric heater
    Pump / tank
    30 GPM centrifugal, 80 gal nominal
    Controls
    Allen Bradley CompactLogix PLC
  • -25°F SST · 125 tons

    125-ton air-cooled food processing chiller with pump and tank

    Refrigerant
    R-507A
    Fluid
    50% propylene glycol
    Compressors
    (3) semi-hermetic compact screw
    Condenser
    Air-cooled, 472" L x 90" W x 60" H
    Tank
    900 gallon stainless reservoir
    Controls
    Allen Bradley CompactLogix

One 70,000 sq ft plant in Cleveland

Four 15-ton overhead bridge cranes with 28 ft under hook, eight 1-ton jib cranes, a UL 508 panel shop, a factory acceptance testing department, a compressor rebuild shop and a stocked service parts department.

Our quality management system is based on ISO 9001 and lean manufacturing practices.

Inside the plant

Tempest manufacturing plant floor in Cleveland with overhead cranes

Tested here before it ships

Every system is 100% built and tested to the engineered functional and performance specification in our own factory acceptance testing department. Controls are proven on our PLC simulator first.

The FOCESS engineering process

Tempest in-house factory acceptance testing

From a garage in 1983 to custom chillers

Tempest began as Ruebensaal Refrigeration, an industrial refrigeration service company working out of the owner's garage. It is still family owned and run by the second generation, and service is still part of every job.

Company timeline

Tempest team at the 35 years celebration

Tell us about your process application

Prefer to talk? Sales (216) 883-6500. Chiller down? (216) 883-6622, 24/7.

  1. Load: max and min cooling or heating load (tons, kW or BTUH).
  2. Fluid: type, flow rate (GPM), supply and return temperatures.
  3. Area classification: non-hazardous, or Class 1 Div 2 Group B, or C and D.

Call salesGet a quote